InVade Bio Cleaner

InVade Bio Cleaner is a versatile and superior cleaning agent for hard surfaces and floor mopping. Formulated with premium natural, scum-eating, odor-eliminating microbes, citrus oil and other cleaners, InVade Bio Cleaner contains no harsh chemicals or odors.

InVade Bio Cleaner Features:
* May be used in hand-held manual spray applicators, power sprayers, hose-end sprayers or mop applications
* Ideal for commercial kitchens, dumpsters pads and outdoor dining areas
* Other applications include restrooms and other contaminated surfaces such as kennels
* Works great in cracks and crevices, and other scummy areas eliminating organic build up and odors

InVade Bio Cleaner Uses/Applications:
InVade Bio Cleaner contains premium, natural microbes that eliminate organic debris and odors, citrus oil, cleaners and foaming agent. It cleans the way mother nature intended without harsh chemicals or fumes. Do not apply to direct food contact surfaces or unsealed wood. Do not blend with bleach, acid or caustic cleaners, disinfectants or antimicrobial products. Contact us for recommendations for other applications.

Mopping: Use 1 oz per gallon (4 oz per typical yellow mop bucket) of warm (not scalding hot) mop water. Do not add other cleaners. After mopping, pour remaining mop water in drains. For best results, use daily or at least three times a week. Do not rinse treated areas or use bleach, caustic cleaners or disinfectants in mop water.

Spraying: For hand or pump-up sprayers, use 8 oz per gallon of water. For power sprayers or hose-end sprayers, use 1-2 oz per gallon of water. Spray down areas where organic build-up has accumulated and/or where odors are a problem. These areas include under and behind equipment, drains, floors, baseboards, the floor-wall junction, trash cans, enclosures and chutes, dumpsters and pads, urinals, kennels and other animal areas, bird, rodent or other animal droppings, and other hard surfaces where organic build-up and odors are a problem. Do not rinse treated areas or use bleach, caustic cleaners or disinfectants in the treated area.

Foaming: Pour directly into a bottle with a foam sprayer, the Foamer Simpson or other pump up foamer, or a powerfoamer. Apply foam to areas with organic build-up and odors, such as the areas listed above under "Spraying". Do not clean up after treatment. Allow foam to dissipate (within an hour or two).

Drains: Moisten drain with warm water (1-2 gal) if not used regularly, and apply at low drain usage times of the day. Apply to each drain around the edges sufficient to coat the sides of the drain. 4 oz is typical for a 4 inch drain. Adjust the amount up or down for larger or smaller drains. Repeat every other day for the first week and then 1-2 times per week as needed for ongoing maintenance.